The IRIS 500 amplifier is composed of - Motherboard = M - Analogboard = A and if required - Digitalboard = D The amplifier is composed basically of motherboard and analogboard, but when discrimination is difficult, for example between adjacent and frontal flames, digital board is necessary because it will accurately define the flame-out ratio with respect to the burner and the adjacent or opposite burners. The flame signal can be an analog 0 - 20 mA on analogboard or/and a four digit LED display on digitalboard. - housing EEx - d IIC or for back panel installation - 100 % fail safe and self checking

DESCRIPTION	Flame Signal Amplifier
EXECUTION	for PANEL INSTALLATION or CENELEC ICC T6 IP66
FAIL SAFE	YES, 100%
SELF CHECKING	YES, on flame detector
FLAME STRENGHT INDICATION	0 to 25 mA on ANALOG CARD Four digits on DIGITAL CARD
FLAME STRENGHT SIGNAL OUTPUT	0 to 20 mA for REMOTE INDICATION
CHANNELS	TWO, selected by EXTERNAL SWITCH
LED INDICATIONS	TWO, UV tube warning and failure
RELAYS OUTPUTS	1 SPDT, 1A 240 VAC for SAFETY 1 SPDT, 2A 240 VAC for DISCRIMINATION
DROP OUT TIME	ADJUSTABLE from 1 to 6 seconds up to 6 : 1 for ANALOG CARD RELAY up to 9999 : 1 on DIGITAL CARD RELAY
DISCRIMINATION	Between adjacent and frontal flames by using DIGITAL CARD RELAY